What is a UPS? (Uninterruptible Power Supply)

▶ C’mon over to https://realpars.com where you can learn PLC programming faster and easier than you ever thought possible!

=============================

▶ Check out the full blog post over at
https://realpars.com/uninterruptible-power-supply/

=============================

An Uninterruptible Power Supply is a device that is used to keep computers and equipment safe when there is a loss, or a significant reduction, in the primary power source.

Once this is detected, the control is transfer over to the batteries, and via an inverter, the batteries DC voltage is converted into AC for the devices.

In reality, it doesn’t have to be computers systems and equipment that are kept alive by UPS. It could be anything from a fish tank, to a foot massager!

We aren’t just talking about plain power outages, lights off, TV off, everything, but we can sometimes get spikes in power where a sudden drop can assure our devices are momentarily powered off, or something known as a brown-out.

The amount of time the UPS can sustain a system for can vary, but it allows the opportunity for the issue to be resolved, or at the very least, allows for the systems to be shut down in a controlled manner.

Since a UPS is a system that uses batteries to power a system should the supply be compromised, we, of course, have batteries and a battery charger.

Since the batteries use DC current and our incoming supply is AC current, we need to convert DC to AC using an inverter.

A UPS provides second-level surge protection, but although it does provide some protection, it should usually be used alongside an adequate Surge Protection Device (SPD) to extend the life of the UPS as well as the attached equipment.

Firstly, and the most common in smaller systems is the Standby or Offline UPS.

The Standby UPS lays in wait for its time to spring into action, and once there is a power failure, it takes control. The Standby UPS tends to be the most cost-effective UPS available.

Next up, we have the Line Interactive UPS. It is very similar to a Standby UPS but with the added ability to regulate voltage automatically.

This means that it monitors the incoming supply and can help out if it detects that the voltage is a bit low, or a spike is causing it to go too high.

It can add or subtract power in this way to make the output to our devices constant!

This type of UPS is particularly useful for the brown-out situation we’ve already mentioned, or power spikes or surges.

Now we have the Online Double Conversion UPS. This type of UPS is efficient as the primary source of power isn’t the incoming supply, rather it is the battery power.

So when we have a power outage, there is no transfer switch to close, meaning no time to switch that you can get with the other type of UPSs.

When the incoming supply is ON, the batteries simply charge up. It is called a double-conversion because it converts the AC incoming supply to DC, and then the inverter converts it back to AC for the output.

In general, it ensures a far higher degree of isolation of the load from the irregularities on the mains supply.

These are the most common types of UPS available. Of course, there are other types that fit a particular form or function, but these tend to be for more specialist needs.

=============================

Missed our most recent videos? Watch them here:

https://realpars.com/fire-alarm-system/

https://realpars.com/ip-rating/

https://realpars.com/pid-tuning-parameters/

=============================

To stay up to date with our last videos and more lessons, make sure to subscribe to this YouTube channel:

http://goo.gl/Y6DRiN

=============================

TWEET THIS VIDEO https://ctt.ac/irfOp

=============================

Like us on Facebook: https://www.facebook.com/therealpars/

Follow us on Twitter: https://twitter.com/realpars

Follow us on LinkedIn https://www.linkedin.com/company/realpars

Follow us on Instagram https://www.instagram.com/realparsdotcom/

#RealPars #ElectricalEngineering #UPS #UninterruptiblePowerSupply

50 Comments

  1. BR Electricity KH [បូរី] on April 2, 2021 at 11:31 pm

    Thank you very much bro for sharing video ups good.

  2. Alikhan Zulkashov on April 2, 2021 at 11:34 pm

    I would like to ask if the battery charger works as the same as the rectifier does converting AC to DC?

  3. Sol Man on April 2, 2021 at 11:34 pm

    Thank you. Easy to understan

  4. RealZanzi on April 2, 2021 at 11:35 pm

    Thanks

  5. Lebone Ledwaba on April 2, 2021 at 11:35 pm

    Very informative video, thank you very much 👍

  6. Furaido Chikin on April 2, 2021 at 11:36 pm

    I will buy ups now

    Thanks for the info

  7. Rob erto on April 2, 2021 at 11:36 pm

    Hello: thanks a lot for your video. Could you please inform if this video is for commercial UPS’s and not for Industrial UPS’s? Regards.

  8. Ibrahim Daruwala on April 2, 2021 at 11:37 pm

    GREAT EXPLANATION TAKES LOT OF TIME TO MAKE A INFORMATIVE VIDEO SO THAT EVERY ONE CAN UNDERSTAND

  9. Loyiso Vamsinya on April 2, 2021 at 11:37 pm

    Good work keep it up wish u guyz can create more stronger ups the one can manage heavy load for example fridge that will be better

  10. Amira Janah on April 2, 2021 at 11:38 pm

    Thank you for the video , the explanation was so brilliant, now how can i size the UPS power of a system ?

  11. Riyadh H on April 2, 2021 at 11:38 pm

    Great explanation! 👍

  12. random stuff on April 2, 2021 at 11:39 pm

    3:48 why separate the battery charger and the rectifier? Battery chargers already have rectifiers in them.

  13. Xenia Kekae on April 2, 2021 at 11:40 pm

    I’m a business student working with a Tech Company now and this video was perfectly explained. GREAT JOB!

  14. Frs Kwn on April 2, 2021 at 11:43 pm

    What if I plug in something that requires more wattage into my UPS’ "battery and surge protection" sockets for the sake of not having "Surge only" sockets . Would it damage my equipment?

  15. Chris Brand on April 2, 2021 at 11:43 pm

    Thank you very much

  16. hussain6953 on April 2, 2021 at 11:44 pm

    Great Job.

  17. Eliel Murmu on April 2, 2021 at 11:44 pm

    Very helpful!

  18. Derin A. Maleek on April 2, 2021 at 11:44 pm

    hello ….please make a video about (SPPA T 3000) CONTROL system best regards

  19. iBad 666 on April 2, 2021 at 11:45 pm

    Thanks for sharing, very clear explanation.

  20. khushi jain on April 2, 2021 at 11:48 pm

    Thankful to you that we can learn!

  21. Kenny W on April 2, 2021 at 11:48 pm

    Great channel and great content.

  22. Nik97LL on April 2, 2021 at 11:48 pm

    you made me fulfill some gaps i had in Marine Electric Propulsion systems (in rectifiers and invertes) THANK YOU!!!

  23. ramin alikhani on April 2, 2021 at 11:49 pm

    Much better than wikipedia!

  24. Wail Rimouche on April 2, 2021 at 11:51 pm

    Can we get a variable frequency drive that is also a UPS?

  25. مصعب ابولوم on April 2, 2021 at 11:52 pm

    Thank you very much for the translate it’s help a lot of people ❤️

  26. Nikki Holbert on April 2, 2021 at 11:52 pm

    So..if I’m building a pc..Do you buy this instead of a power supply or do you get both?

  27. Sheraz Saeed on April 2, 2021 at 11:53 pm

    you r one of the best technical youtuber by far distance😍

  28. Sagar sawant on April 2, 2021 at 11:54 pm

    ❤️🙏👍

  29. Janaki Janu on April 2, 2021 at 11:54 pm

    Well explained

  30. Liou Jason on April 2, 2021 at 11:56 pm

    This video is very helpful.
    deeply thankful.

  31. coltz89 on April 2, 2021 at 11:57 pm

    Do your courses cover FBD and STL as well? I notice a lot of the icons are ladder which isn’t used in my company. Thanks!

  32. ahmed adardor on April 2, 2021 at 11:57 pm

    Thanks all realpars team

  33. Omen Dragon on April 2, 2021 at 11:58 pm

    Just found out this existed. Good to know.

  34. huynh tuanphuong on April 3, 2021 at 12:01 am

    😍😍😍😍😍

  35. Jiwan Verma on April 3, 2021 at 12:02 am

    Pls inform do we need to keep ups switch on from switch board( switch off from powwer button) all the time even when we are not working on computer. Keeping switch on all the time affects internal part as ups get little hot. UPS ( APC BACK 600 IN).

  36. rose e on April 3, 2021 at 12:02 am

    thank you for this :))

  37. Sudeep Biswas on April 3, 2021 at 12:02 am

    Nice sir !!!

  38. Anirban Jana on April 3, 2021 at 12:03 am

    When the electricity is available, does the UPS charge automatically?? Or should we need to switch off the UPS and charge it???

  39. Zdan Germany Zydan on April 3, 2021 at 12:05 am

    Excuse me,what is defference between UPS online and offline?

  40. Celso Madeira on April 3, 2021 at 12:05 am

    Excelente! Good job! Real pars each time better

  41. Alex አመክንዮ on April 3, 2021 at 12:09 am

    Can i use an ips ( Instant power supply) instead of an ups?

  42. Mark Allen on April 3, 2021 at 12:10 am

    Wow, I bet those UPSs drain out pretty good when the wind ain’t blowing. Even with the wind blowing you’d only have a very small percentage of what you really need to make things work. Due to this, I doubt the accuracy of your entire video. I’ll stick with my APCs and Salem nuclear plant, thank you.

  43. samhoodnificent on April 3, 2021 at 12:10 am

    Is it possible to run the UPS on a solar system for off the grid power for a house

  44. Fred Dukes on April 3, 2021 at 12:11 am

    Confused on how much wattage of the UPS I should buy, I have a high end gaming rig and here are my specs.

    CPU: ryzen 5 3600
    RAM: T-force delta 2×8 16gb ddr4 3000mhz
    GPU: RTX 2060 SUPER 8gb
    PSU: SEASONIC 750W

    Do I need a UPS with a wattage higher than my PSU? Any advice would be appreciated!

  45. safa haidar on April 3, 2021 at 12:15 am

    is the battery charger coming with rectifier in online and offline ups just like the double conversion ups?is there any battery charger in double conversion ups? please clarify it for me

  46. ARPIT Mishra on April 3, 2021 at 12:23 am

    very good explanation

  47. Arumuga Raja Palraj on April 3, 2021 at 12:25 am

    Hi,
    Nice video 👌 ( UPS )
    Please upload how to transfer the load to battery bank ( Setting ) & troubleshooting

  48. Gangsta A Glide on April 3, 2021 at 12:25 am

    Thaaank youu sir

  49. Engineer SAM on April 3, 2021 at 12:27 am

    Can we know which type of UPS are we dealing with by looking at its brochure?

  50. ramin alikhani on April 3, 2021 at 12:28 am

    Excellent! I barely could finish high school but I could understand everything in this video, because the explanation was brilliant! Now I can send my resume as an electronic engineer!

Leave a Comment