how to tab 6×6 monocrystalline solar cells

you need

rosin flux pen
2mm tabbing wire
silver solder lead free no flux
a flat surface to work a surface that can transfer heat well is a bonus to keep cells cool while soldering
do not put weights on cells to hold them down, they will crack!!!

28 Comments

  1. Vlad Klimovich on May 8, 2021 at 12:54 am

    Check InpliX handbook if you want to make it cheaper and better.

  2. rokj on May 8, 2021 at 12:57 am

    Great howto. Thanks!

  3. Sobhan Anavarapu on May 8, 2021 at 12:57 am

    ITS REALLY GREAT VIDEO, I JUST WANT TO KNOW HOW TO MAKE THIS MONOCRYSTALLINE CELL, CAN YOU SUGGEST ME.

  4. Shantelle Adeline on May 8, 2021 at 1:00 am

    With Avasva plans doing something like that was easy.

  5. Romaine Athey on May 8, 2021 at 1:02 am

    I made it by myself. I used inplix scripts for that.

  6. piccolo sun on May 8, 2021 at 1:08 am

    the bend probably from you heat

  7. curt okay on May 8, 2021 at 1:09 am

    why the full length

  8. Karyl Debolt on May 8, 2021 at 1:11 am

    You can learn from inplix scripts how to make it yourself.

  9. Cameron Moon on May 8, 2021 at 1:12 am

    well if you havent figured it out yet the entire top is negative and the entire bottom is posotive
    so the middle wire gets wired just like the sides

  10. Romana Angersbach on May 8, 2021 at 1:13 am

    You can use inplix instructions to build it yourself guys.

  11. erinbeth07 on May 8, 2021 at 1:15 am

    Great video I want to do this just my elec bill is killing me. I really like How you explain everything.

  12. arklanbk on May 8, 2021 at 1:20 am

    soddering iron
    silver sodder

  13. Shantell Amend on May 8, 2021 at 1:21 am

    Check Inplix if you’d like to build it yourself 🙂

  14. ajith kumar on May 8, 2021 at 1:27 am

    I need detailed information about tabbing wires

  15. Dan Perry on May 8, 2021 at 1:29 am

    How does putting solder on the top of the tabbing wire adhere it to the panel which is on the underside?

  16. Vadym Klimovich on May 8, 2021 at 1:29 am

    it with the help of Avasva solutions.

  17. Shanta Hsieh on May 8, 2021 at 1:30 am

    I made it. I used inplix scripts for that. It was pretty easy to make it

  18. Shantel Bollmann on May 8, 2021 at 1:35 am

    Just use InpliX instructions. you will make it. its so easy

  19. Karyl Debolt on May 8, 2021 at 1:37 am

    Check InpliX handbook if you want to make it cheaper and better.

  20. Vasya Yatsenko on May 8, 2021 at 1:38 am

    If you want to make it too just use InpliX handbooks.

  21. Shantel Bollmann on May 8, 2021 at 1:43 am

    Just use InpliX instructions. you will make it. its so easy

  22. Cameron Moon on May 8, 2021 at 1:45 am

    go two ebay to order cells. of many different sizes

  23. Shannon Amend on May 8, 2021 at 1:45 am

    I made it by myself. Just go to Inplix webpage if you’d like do the same

  24. gary Bonard on May 8, 2021 at 1:45 am

    Hi can you tell me how the polarity on the three taps goes

  25. MassDeception on May 8, 2021 at 1:50 am

    How do you solder the positive to the negative?

  26. JOSH GARCIA on May 8, 2021 at 1:50 am

    GREAT VIDEO…QUESTION IS THERE ANY DIFFERENCE FROM THE 2 TAB WIRE LINE OR THE 3 TAB WIRE LIBE THAT YOU HAVE?

  27. rogersgirl5165 on May 8, 2021 at 1:52 am

    never done solar panels before. i got 6×6 solar cells i dont under stand what you do with the middle wire when it comes to the end. i know you have the red for pos and the black for neg but what is the middle one?

  28. Louis Adams on May 8, 2021 at 1:52 am

    Where did u buy them from?

Leave a Comment