how to tab 6×6 monocrystalline solar cells

you need

rosin flux pen
2mm tabbing wire
silver solder lead free no flux
a flat surface to work a surface that can transfer heat well is a bonus to keep cells cool while soldering
do not put weights on cells to hold them down, they will crack!!!

28 Comments

  1. MassDeception on March 18, 2021 at 11:00 pm

    How do you solder the positive to the negative?

  2. arklanbk on March 18, 2021 at 11:01 pm

    soddering iron
    silver sodder

  3. ajith kumar on March 18, 2021 at 11:05 pm

    I need detailed information about tabbing wires

  4. rogersgirl5165 on March 18, 2021 at 11:09 pm

    never done solar panels before. i got 6×6 solar cells i dont under stand what you do with the middle wire when it comes to the end. i know you have the red for pos and the black for neg but what is the middle one?

  5. Louis Adams on March 18, 2021 at 11:12 pm

    Where did u buy them from?

  6. Shanta Hsieh on March 18, 2021 at 11:13 pm

    I made it. I used inplix scripts for that. It was pretty easy to make it

  7. Shannon Amend on March 18, 2021 at 11:15 pm

    I made it by myself. Just go to Inplix webpage if you’d like do the same

  8. Cameron Moon on March 18, 2021 at 11:21 pm

    well if you havent figured it out yet the entire top is negative and the entire bottom is posotive
    so the middle wire gets wired just like the sides

  9. gary Bonard on March 18, 2021 at 11:25 pm

    Hi can you tell me how the polarity on the three taps goes

  10. Cameron Moon on March 18, 2021 at 11:25 pm

    go two ebay to order cells. of many different sizes

  11. Vlad Klimovich on March 18, 2021 at 11:28 pm

    Check InpliX handbook if you want to make it cheaper and better.

  12. Shantell Amend on March 18, 2021 at 11:30 pm

    Check Inplix if you’d like to build it yourself 🙂

  13. Karyl Debolt on March 18, 2021 at 11:31 pm

    You can learn from inplix scripts how to make it yourself.

  14. rokj on March 18, 2021 at 11:37 pm

    Great howto. Thanks!

  15. Vadym Klimovich on March 18, 2021 at 11:39 pm

    it with the help of Avasva solutions.

  16. Shantel Bollmann on March 18, 2021 at 11:40 pm

    Just use InpliX instructions. you will make it. its so easy

  17. curt okay on March 18, 2021 at 11:43 pm

    why the full length

  18. Romaine Athey on March 18, 2021 at 11:43 pm

    I made it by myself. I used inplix scripts for that.

  19. Sobhan Anavarapu on March 18, 2021 at 11:44 pm

    ITS REALLY GREAT VIDEO, I JUST WANT TO KNOW HOW TO MAKE THIS MONOCRYSTALLINE CELL, CAN YOU SUGGEST ME.

  20. Karyl Debolt on March 18, 2021 at 11:44 pm

    Check InpliX handbook if you want to make it cheaper and better.

  21. Shantelle Adeline on March 18, 2021 at 11:45 pm

    With Avasva plans doing something like that was easy.

  22. piccolo sun on March 18, 2021 at 11:46 pm

    the bend probably from you heat

  23. Vasya Yatsenko on March 18, 2021 at 11:47 pm

    If you want to make it too just use InpliX handbooks.

  24. JOSH GARCIA on March 18, 2021 at 11:50 pm

    GREAT VIDEO…QUESTION IS THERE ANY DIFFERENCE FROM THE 2 TAB WIRE LINE OR THE 3 TAB WIRE LIBE THAT YOU HAVE?

  25. Romana Angersbach on March 18, 2021 at 11:55 pm

    You can use inplix instructions to build it yourself guys.

  26. erinbeth07 on March 18, 2021 at 11:55 pm

    Great video I want to do this just my elec bill is killing me. I really like How you explain everything.

  27. Dan Perry on March 18, 2021 at 11:57 pm

    How does putting solder on the top of the tabbing wire adhere it to the panel which is on the underside?

  28. Shantel Bollmann on March 18, 2021 at 11:59 pm

    Just use InpliX instructions. you will make it. its so easy

Leave a Comment