Electronics Schematic Tutorial Walkthrough

***if you get stuck trying to find that first component, add a “linear” library from the library manager by going to: Library tab – Library Manager – Available – find “linear” – then click “Use”***

In this video, we’ll walk you through the steps related to the documentation tutorials, found here:
http://help.autodesk.com/view/fusion360/ENU/?guid=ECD-TUT-SCHEMATIC-TOP-LEVEL

Make sure to see part 2 for the PCB layout!

►FREE TRIAL | https://autode.sk/2uLm8a6
►SUBSCRIBE | https://autode.sk/2q61ZpD
►GET STARTED | https://autode.sk/2HaB2Jk

CONNECT:
INSTAGRAM | https://autode.sk/2Enzh8P
FACEBOOK | http://autode.sk/19jII5A
TWITTER | http://autode.sk/19jIJXc

27 Comments

  1. Dylan Rice on February 26, 2021 at 9:38 pm

    Solid video overall. Gotta say I personally would find it incredibly helpful to ALL the libraries needed listed at the beginning of the video. I had to figure out on my own to add the linear, rcl and led libraries, which as a first time user of ECAD wasn’t super easy. All mentioning the names of components would help if you’re going to go as fast as you are I had to pause many times to look at the name.

  2. xue roger on February 26, 2021 at 9:40 pm

    how do you sync schematic to PCB after change?

  3. Jon Byler on February 26, 2021 at 9:42 pm

    I’m having trouble navigating the library. very non-intuitive, search function does not seem to work for me. Where are you selecting these particular capacitors? The ones that I found, it would not allow me to change values for them or assign values. I guess I need to look for a tutorial about how to add your own components?

  4. Hari Wiguna on February 26, 2021 at 9:42 pm

    Thank you for these electronic design tutorials! Question: When I clicked the ERC after completing my schematic, I have an extra warning that you did not get in the video: "Board and schematic are not consistent! No forward-/backannotation will be performed! Use the ERC command to get a detailed error report" What did I do wrong?

  5. Auarhau on February 26, 2021 at 9:43 pm

    I cant find the first part. The timer search shows 0 results.

  6. xue roger on February 26, 2021 at 9:47 pm

    thanks for the effort, I can’t add label or name, it keep beep at me

  7. neosarchizo on February 26, 2021 at 9:47 pm

    Can I use all eagle functions? And how can I add custom library?

  8. Aksrockets on February 26, 2021 at 9:53 pm

    I’d be great if you made a video for Eagle users switching over to Fusion and what changes they should pay attention to.

  9. Carlos Ricco on February 26, 2021 at 9:53 pm

    By following this tutorial I couldn’t open "linear", even try to search for "555". anything wrong?

  10. Autodesk Fusion 360 on February 26, 2021 at 9:56 pm
  11. hpekristiansen on February 26, 2021 at 9:57 pm

    What is the thought behind this? How does it compare to Eagle? Is it simpler? -just an alternative -is Eagle to be discontinued?

  12. Ron Owensby on February 26, 2021 at 9:57 pm

    I see I am not the only one who had trouble accessing the electronics design, If you can’t find it look under the file (with save, save as etc). Now if I can figure out libraries, and how to find components (among other things).

  13. Alex Kistner on February 26, 2021 at 9:58 pm

    Great next step. Looking forward for the future of eagle / fusion 360. Just tried it today. Really appreciate the integration!

  14. John Car on February 26, 2021 at 10:02 pm

    I am interested in creating Schematics for Aircraft Avionics. Can you create a tutorial on how to create library components from drawings provided by the manufacture? Here is a link to the installation manual. https://support.garmin.com/en-US/?partNumber=010-01056-00&tab=manuals

  15. Ken Blanch on February 26, 2021 at 10:03 pm

    So I opened library manager to add the linear library. Then I found the timer clicked OK the i get this error message "No valid assets been selected. Footprint required.What next??

  16. Americo Rosales on February 26, 2021 at 10:04 pm

    thanks I like you tutorial , I will follow you

  17. Sergey Romanov on February 26, 2021 at 10:06 pm

    What?! Are you crazy! My goodness! PCB development in Fusion! Mind blowing. If you do this feature as good as you did modeling, this will be pure gold! Thank you.

  18. Ari Pudjowibowo on February 26, 2021 at 10:12 pm

    AWESOMEEEEEEEE

  19. Craig Hollabaugh on February 26, 2021 at 10:14 pm

    Same here, no "electronic design" menu item.

  20. Grey Ghost on February 26, 2021 at 10:16 pm

    You sound like a handsome Dracula… Great Video. I can’t wait to try it.

  21. Belen Hedderich on February 26, 2021 at 10:17 pm

    Now eagle is integrated at fusion?

  22. Nputaansuu on February 26, 2021 at 10:22 pm

    I have Fusion 360 up and tried to follow along. I don’t have the new electronics design on my client. Perhaps it will come soon. I will be working with this right away. Thanks for moving in this direction.

  23. stefan CHO on February 26, 2021 at 10:23 pm

    is this not active in educational version? I can’t see this

  24. Geoff Tayler on February 26, 2021 at 10:24 pm

    Great new feature, and thanks for a great introductory video. I’ve been playing with the electronics design feature for a couple of weeks now, and since I’ve never experienced Eagle, I’m really impressed. However I’m getting frustrated with the message "The free version of Fusion 360 cannot perform the requested action", which seems to pop up all too frequently. It would be helpful if there was some comprehensive documentation on what the license restrictions are, since usually this message pops up without any explanation. So far I’ve found through trial and error that board size is limited to approx 80cm2, and that hierarchical design is essentially disabled , since you are limited to one module in a schematic.

  25. John Car on February 26, 2021 at 10:26 pm

    I would like to create my own components? Specifically, I want to design components to design aircraft schematics using Garmin avionics equipment diagrams. Can you create a tutorial on how to accomplish creating your own components?

  26. Jon Byler on February 26, 2021 at 10:29 pm

    Excited by the possibilities that this brings, I hope the learning curve is not too steep. I never did figure out how to use eagle… I’ve had a few other circuit simulators/schematic drawing tools that have been much easier to use, but they don’t offer the ability to make a PCB directly as this does. Hopefully as this is rolled out and developed further, it gets easier to navigate and use.

  27. Manuel Camelo on February 26, 2021 at 10:31 pm

    Please Autodesk teach us Electrical and Electronics Enginnering ! :’0

Leave a Comment